Admin Login -

Select language:

IP address

To access the router admin page enter Go to your browser's URL bar or click the box below.

Log in

1. How to log in ?

Follow these simple steps to login to your Router with IP address.

    1. Open a web browser and go to or in your browser's URL bar.

    2. A login page will appear asking you to enter your login username and password.

    3. Enter username and password in the specified fields.

    4. You will now login to your router's Admin Panel.

2. What is this IP address ? is the Private IP address used as the default IP address on Netgear and D-Link routers. In case if there is another router on the same local network using the same default IP address, we can change that IP address through the router control panel.

What is IP address

Your computer has a Public IP address assigned by your Internet Service Provider (ISP). This address must be unique across the entire Internet. In addition, your router also has a Private IP address, which is only allowed to appear on private networks. This IP does not need to be globally unique, as it is not directly accessible and no one can access the IP address outside of the private network.

Internet Assigned Numbers Authority (IANA) is the global organization that administers IP addresses. It originally defined a type of IP address named IP version 4 (IPv4). This type is a 32-bit number, usually represented by four decimal point-separated numbers - for example, Each decimal must have a value between 0 and 255, which means that the IPv4 system can hold about 4 billion unique IP addresses. This number seemed huge in the early days of the Internet, but the reality is much larger now.

Why do most routers use the IP address as the default address? The answer is simple, IP address is a non-routable address, moreover Private IP address is not assigned to any organization and does not need to be assigned by an Internet service provider.

There is also some opinion that all IP addresses are routed, because Private IP addresses are specific, not publicly routed on the Internet but are routed through NAT gateway or proxy server before being connected to the Internet.

Private IP addresses are used in most large and small business networks because Internet service providers (ISPs) typically assign a public IP address to a location.

The IPv4 addresses are slowly running out, and that's why we have to rely on Private IP addresses. Until IPv6 comes out, users will have a public IP address for all devices, but that day is still far away.

If there are multiple devices that need to connect to the Internet with one public IP address, the NAT (Network Address Translation) gateway will be used to compile all the Private IP addresses to the public IP address before connecting to the public IP address. connected to the Internet. A NAT device is also considered a router that provides private IP addresses to all computers on the local network (DHCP server).

How to change the router's IP address

The default gateway IP address is pre-specified by your internet service provider, however, the user can configure it according to their needs. It is often changed to prevent bad guys from accessing your admin dashboard, prevent DDoS attacks, or just to add an extra layer of safety. Here's how to do it


  1. Log in to your default admin panel at or (admin / admin is the username and password)

  2. Go to Advanced Settings > Network > LAN.

  3. In the "IP Address" field, you can change it to your desired address such as


  5. Save it and the router will reboot to apply the changes.


  1. Login to your router configuration page (username: admin & password: admin/blank)

  2. Go to Settings> Network Settings.

  3. You should now find the Router IP Address field.

  4. dlink wifi

  5. Change it to preference and Save Settings.

Find Router IP Address

If you entered in your browser and didn't get to your router's login page, how can you find out what address your router uses? There are some quick and easy ways to find out.

First, most routers have a sticker somewhere with the default IP address, username, and password. You can also find similar information in the user manual.

Speaking of manuals, if you've lost the manual, there may be a PDF version of it on the manufacturer's website.

If you are connecting to the router using a Windows computer, you can also easily find the router using Command Prompt:

  1. Open Start Menu and find CMD, then open item Command Prompt when it shows up.

  2. At the prompt, enter ipconfig then press Enter.

  3. cmd

  4. Find an entry labeled Default Gateway.

  5. cmd

    The default gateway IP address is the same as the router's IP address, so typing it in the address bar of your web browser will take you to the login screen.

Forgot IP Address Username and Password ?

If you forgot your Username and Password IP Address or if they don't work you can

    See the manual/box or the back of the router. (or check the default username and password list).

    If you changed your password and lost or forgot it, you need to do a factory reset. To do that, look for a small RESET button hidden on the back of your router. Press and hold that button for about 10-15 seconds with a paper clip or needle. The router will automatically reboot and return to default settings.

Have solved the problem yet?

What is Now you should know. It's easy once you understand the reasoning behind it but can still feel a bit too technical for some. Modern routers also offer other ways to access their settings, most commonly a smartphone app that can do all the complicated stuff in the background for you. So be sure to check if your router has a compatible app!

Common IP Addresses